Contamination Control
Contaminants in lubricating oils can come from different sources and take different forms. These include foreign solid particulates and other matters, liquids such as water or glycol, dissolved gases, soft and hard degradation products from oxidation, stress, and other sources. All of these contaminants can be removed from the oil. The earlier these contaminants are removed the better not only for the machine but also for the life of the oil. Removal of contaminants, soft or solid, require relevant techniques and technologies.
Solid Particle Filtration
The choice of a filtration system for solid particle removal depends on the type of oil, viscosity, temperature, reservoir volume, and the required cleanliness levels. Filtration units are available for nearly almost industrial oil filtration applications. Consult our experts about your filtration needs....
Water / Liquid Filtration
The selection of a water of liquid removal from filtration system from oil also depend on many parameters. We offer a very wide range of water/liquid filtration systems that cover nearly any industrial application. Consult our experts about your liquid/water filtration needs.....
Varnish Removal
Varnish is the cholesterol of the machine, and is formed in lubricating and hydraulic oils due to oxidation, stress, and other degradation mechanisms. ESP Varnish removal Technology uses specially formulated resin that removes varnish from the oil and leaves the oil clean without affecting the oil in any negative way. Consult with our experts about your varnish removal needs.